banner

Všechny časy jsou v UTC + 1 hodina [ Letní čas ]




Odeslat nové téma Odpovědět na téma  [ Příspěvků: 13 ] 
  Verze pro tisk

RAIDiator - softwarové srdce NASek
Autor Zpráva
PříspěvekNapsal: 17:42, 17 lis 2009 
Offline
admin
admin
Uživatelský avatar

Registrován: 13:40, 11 led 2006
Příspěvky: 1306
Obrázek

Netgear RAIDiator

Využíváte ve své síti zařízení NAS od společnosti NETGEAR (ReadyNAS řady: Pro Pioneer, Pro Business a NVX)?

Pokud ano, pak zde naleznete vždy čerstvé firmwary, které vaše diskové pole řídí!



Nejnovější verze nese označení 4.2.7.,který jsem otestoval a bohužel musím protentokrát všechny uživatele varovat, aby zůstali na verzi 4.2.5., protože se v nejnovější verzi objevily chyby, které nejsou žádoucí :(

Pokud už náhodou novou verzi máte nainstalovanou, nezoufejte, ikdyž se všeobecně píše, že nelze uskutečnit downgrade, tak to udělat lze.

Známé chyby verze 4.2.7.:
- nahrajete soubor do share složky a zjistíte, že nelze zkopírovat zpět z NASky ani nelze spustit
- snížila se rychlost přenosu dat
- další chyby uživatelů najdete tady

Doporučuji tedy stále využívat firmware s označením 4.2.5., který je vyšperkovaný k dokonalosti.

Stahujte:
Verze 4.2.5. (server rapidshare)
Verze 4.2.5. (server readynas)
(změny ve verzi 4.2.5.)

Verze 4.2.7. (server rapidshare)
Verze 4.2.7. (server readynas)
(změny ve verzi 4.2.7.)

_________________
CPU: Intel i7 2600K @4,5GHz & Noctua NH-D14 RAM: 16GB ADATA DDR3 1600MHz MB: ASUS Maximus IV Extreme-Z VGA: Gigabyte GTX580 HDD: SSD OCZ 120GB Vertex 2 + WD VelociRaptor WD1500HLFS + NAS Zvuk: X-Fi Titanium Fatal1ty Champion Series Zdroj: Fortron Everest 700W Case: Cooler master HAF 932 Enh. Monitor: 24" LCD HP LP2465.
Photo: Nikon D90 se seťákem 18-105mm VR, telátko Nikkor 70-300 VR.


Nahoru
 Profil  
 

Re: RAIDiator - softwarové srdce NASek
PříspěvekNapsal: 23:02, 26 lis 2009 
Offline
admin
admin
Uživatelský avatar

Registrován: 13:40, 11 led 2006
Příspěvky: 1306
Tak a máme tady novou verzi 4.2.8. :!:

Neotestoval jsem ještě tento nový FW v ostrém provozu, ale předpokládám, že opravuje chyby z minulé verze, kdy docházelo k několika chybám v přístupu do adresářů apod..., takže nyní by mělo být vše ok.

Nicméně ještě počkám na reakce zahraničních "testerů" a pak sem dám své vlastní postřehy...

Stahujte:
Verze 4.2.8. (server rapidshare)
Verze 4.2.8. (server readynas)

Změny
Citace:
New features
Updated to ReadyDLNA 0.16.3.

Bug fixes
Fix a potential system hang in rare situations.
Revert to previous ACL support. ACL support in 4.2.7 can cause permission problems with newly created files.
Various iSCSI upgrade fixes.

...zbytek na tomto linku.


Nahoru
 Profil  
 

Re: RAIDiator - softwarové srdce NASek
PříspěvekNapsal: 16:17, 29 led 2010 
Offline
admin
admin
Uživatelský avatar

Registrován: 13:40, 11 led 2006
Příspěvky: 1306
Nová verze k dispozici... 4.2.9. :!:

NETGEAR is pleased to announce the release of RAIDiator 4.2.9 (x86), an update firmware for the ReadyNAS Pro Business Edition, Pro Pioneer, NVX, NVX Pioneer, 2100, and 3200 network attached storage product lines. This release addresses a problem introduced in RAIDiator 4.2.8 that can cause a drive on the ReadyNAS NVX and 2100 platforms to hang, causing a failure condition, and we urge you to apply this update to avoid hitting this condition.

Změny:
Citace:
New features
Add ReadyDLNA playlist support.
Updated to ReadyNAS Vault to 2.0.9.

Bug fixes
Fixed issue where disks on NVX/2100 where disks may be subjected to hang due to increased monitoring.
Fixed support for Win2K with Active Directory.
Fixed support Windows 7 where a very large number of files are copied to the ReadyNAS.
Fixed FTP memory leak.
Fixed User and Group account table slider in domain mode.
Fixed javascript error in FrontView.
Fixed possible Out-of-Memory condition during disk scrubbing.


Stahujte (cca 55 MB):
http://www.readynas.com/download/RAIDia ... -x86-4.2.9

...zbytek na tomto linku.


Nahoru
 Profil  
 

Re: RAIDiator - softwarové srdce NASek
PříspěvekNapsal: 23:06, 22 kvě 2010 
Offline
admin
admin
Uživatelský avatar

Registrován: 13:40, 11 led 2006
Příspěvky: 1306
Nová verze k dispozici... 4.2.11. :!:

NETGEAR is pleased to announce the release of RAIDiator 4.2.11 (x86), an update firmware for the ReadyNAS Pro Business Edition, Pro Pioneer, NVX, NVX Pioneer, 2100, 3100, 3200, and 4200 network attached storage product lines.

The simplest way to update is to use the System/Update/Remote tab in Frontview. If you prefer, you can choose to do a local update by first downloading the new image here: RAIDiator-x86-4.2.11. We recommend that you update your ReadyNAS to this latest RAIDiator release to ensure your ReadyNAS is running with all the latest bug fixes and enhancements.

Please be warned that once you upgrade to 4.2.11, you cannot downgrade back to 4.2.5 or prior releases.

The following are changes since RAIDiator 4.2.9 (RAIDiator 4.2.10 was not available as a public upgrade).

Změny:
Citace:
New features
Default file system for all x86 devices is now Ext4. If you factory default the ReadyNAS with 4.2.11, you will get the Ext4 with support for files as large as 16TB on 64-bit ReadyNAS systems (Pro, 3100, 3200, 4200). If you upgrade from Ext3, you’ll still be limited to 2TB. We are looking at coming out with an add-on that allows you to convert your Ext3 file system to Ext4.
Multiple LUNs now supported per iSCSI target.
iSCSI volume limit is now 16TB with Ext4 on 64-bit systems (2TB otherwise).
Time Machine limit is now 4TB with Ext4 on 64-bit systems (2TB otherwise).
Simplified SMTP setup for email alerts with presets for popular ISPs.
Provide an easy way to try out ReadyNAS Vault. You’ll get a little popup that gives you a quick way to try Vault for free. Everything you dump into a new share called vault will get backed up automatically to the cloud. Check it out.
Updated NTFS driver.
Updated AFP 3.1 support.
Speed up FAT USB writes when the “Enable fast USB disk writes” option is disabled.
Updated ReadyNAS Remote to v.1.0.9.30.

Bug fixes
Fixed system hang issue on ReadyNAS Pro, NVX, and 2100.
Fixed Online Volume Consistency check on ReadyNAS 3200.
Fixed problem where hot-add would not work in disk slots 3 and 4 of the ReadyNAS NVX/2100.
Fixed iSCSI LUN creation of greater than 2TB when volume on 3200 was greater than 16TB.
Fixed expansion of iSCSI LUN when space available in volume is less than current size of the iSCSI LUN.
Fixed AFP so that changing permissions on a folder in Finder no longer removes the owner’s write privilege.
Fixed CIFS archive bit issue with renamed files and Microsoft Office.
Fixed support for HP hardware iSCSI initiator.
Fixed unmount of USB on backup completion feature.
Properly handle spaces in rsync exclusion lists.
Fixed user and group name auto-completion for share access lists when space characters are used.
Fixed potential hang condition that some forum members have been experiencing.
Fixed “hung mac and receiver hang detected” problem with the network driver. The network driver should no longer disconnect due to this condition.
Fixed a compatibility issue with restoring vRanger backups.
Fixed an issue where a large disk write process could block all other disk writes.
Fixed an issue where you could lose all your user privileges on your shares in domain mode with a large domain.
Fixed teaming management with more than 2 interfaces.
Fixed FrontView teaming interface when multiple teams are formed.
Make disk spindown work after a reboot with journaling enabled.
Fixed the “Disable Full Journaling” option with native Ext4 filesystem.
Remove home share snapshots from FTP when FTP home shares are disabled.


Stahujte (cca 55 MB, server rapidshare):

...zbytek na tomto linku.

_________________
CPU: Intel i7 2600K @4,5GHz & Noctua NH-D14 RAM: 16GB ADATA DDR3 1600MHz MB: ASUS Maximus IV Extreme-Z VGA: Gigabyte GTX580 HDD: SSD OCZ 120GB Vertex 2 + WD VelociRaptor WD1500HLFS + NAS Zvuk: X-Fi Titanium Fatal1ty Champion Series Zdroj: Fortron Everest 700W Case: Cooler master HAF 932 Enh. Monitor: 24" LCD HP LP2465.
Photo: Nikon D90 se seťákem 18-105mm VR, telátko Nikkor 70-300 VR.


Nahoru
 Profil  
 

Re: RAIDiator - softwarové srdce NASek
PříspěvekNapsal: 23:15, 12 črc 2010 
Offline
admin
admin
Uživatelský avatar

Registrován: 13:40, 11 led 2006
Příspěvky: 1306
Nová verze k dispozici... 4.2.12 :!:

NETGEAR is pleased to announce the release of RAIDiator 4.2.12 (x86), an update firmware for the ReadyNAS Pro Business Edition, Pro Pioneer, NVX, NVX Pioneer, 2100, 3100, 3200, and 4200 network attached storage product lines.

The simplest way to update is to use the System/Update/Remote tab in Frontview. If you prefer, you can choose to do a local update by first downloading the new image here: RAIDiator-x86-4.2.12. We recommend that you update your ReadyNAS to this latest RAIDiator release to ensure your ReadyNAS is running with all the latest bug fixes and enhancements.

Please be warned that once you upgrade to 4.2.12, you cannot downgrade back to 4.2.5 or prior releases.

Změny:
Citace:
New features
Added support for archiving TiVo videos to the ReadyNAS, allowing you to also playback these videos from any TiVo in your home. The option resides in the Streaming Services page in the ReadyDLNA option. Enabling TiVo option there will reveal options to activate archiving from discovered TiVo devices on your network and setting archive schedule. You will need the Media Access Key (MAK) from your TiVo to perform the activation. Any recording marked as “don’t erase” on the TiVo will be archived to the ReadyNAS.

Updated to AFP 3.2.

Performance tweaks.

Added high resolution timestamp support over CIFS. This improves the offline file access syncing with Windows.

Bug fixes
Added support for 4K sector drives. If you have already installed 4K sector drives with 4.2.11 or earlier, you can replace each disk one by one, allowing it to complete resync, and all your disks will be 4K aligned, and your performance should be on par with similar 512-byte sector drives.
Properly handle FTP access to home share snapshots.
Fixed several issues with auto power on and power off.
Fixed iSCSI disconnect/reconnect issue.
Disk expansion alerts with vertical expansion has been cleaned up, especially if you’ve done multiple vertical expansion.
Disk test status on LCD should now stick while the testing is done.

Stahujte (cca 62 MB):

...zbytek na tomto linku.


Nahoru
 Profil  
 

Re: RAIDiator - softwarové srdce NASek
PříspěvekNapsal: 23:00, 16 črc 2010 
Offline
admin
admin
Uživatelský avatar

Registrován: 13:40, 11 led 2006
Příspěvky: 1306
Jen taková maličkost... po upgradnutí FW na verzi 4.2.12 budete mít administrační menu a texty kompletně v češtině ;)

...navíc mi připadá, že tento FW je všeobecně dobře odladěný...


Přílohy:
NAS_cz.jpg
NAS_cz.jpg [ 171.68 KiB | Zobrazeno 11139 krát ]
Nahoru
 Profil  
 

Re: RAIDiator - softwarové srdce NASek
PříspěvekNapsal: 11:49, 08 srp 2010 
Offline
admin
admin
Uživatelský avatar

Registrován: 13:40, 11 led 2006
Příspěvky: 1306
Nová verze k dispozici... 4.2.13 :!:

...vyzkoušel jsem ho a vše jede vpořádku...

NETGEAR is pleased to announce the release of RAIDiator 4.2.13 (x86), the latest firmware for the ReadyNAS Pro Business Edition, Pro Pioneer, NVX, NVX Pioneer, 2100, 3100, 3200, 4200, Ultra 4, and Ultra 6 network attached storage product lines. We are releasing this firmware update primarily because of a fix to a network driver problem that resolves several cases of file transfer delays reported by our customers.

The simplest way to update is to use the System/Update/Remote tab in Frontview. If you prefer, you can choose to do a local update by first downloading the new image here: RAIDiator-x86-4.2.13. We recommend that you update your ReadyNAS to this latest RAIDiator release to ensure your ReadyNAS is running with all the latest bug fixes and enhancements.

Změny:
Citace:
Added 1 and 2 hour options to backup and snapshot scheduling as requested by our forum users.
Added iSCSI option for ReadyNAS NVX and Pro Pioneer. If you have one of these two Pioneer Edition units, you can now gain the iSCSI feature by installing this update and then installing the following this add-on.
Added Time Machine archive backup support.
Update backup job logs while the backup job is still running.
Performance tweaks for CIFS.

Bug fixes
Fixed a memory leak with the Network driver on the ReadyNAS Ultra 4, Ultra 6, NVX, Pro, and 2100.
Took out Fast CIFS Writes performance option on x86 systems. No benefit on non-Sparc systems.
Allow tilda “~” character in the backup exclude list.
Fixed import and export of domain ID map.
Quiet down NVX early in the boot process.
Fixed IE8 problem with setting share access restriction in FrontView CIFS page.

Stahujte (cca 62 MB):

...zbytek na tomto linku.


Nahoru
 Profil  
 

Re: RAIDiator - softwarové srdce NASek
PříspěvekNapsal: 22:32, 20 říj 2010 
Offline
admin
admin
Uživatelský avatar

Registrován: 13:40, 11 led 2006
Příspěvky: 1306
Nová verze k dispozici... 4.2.15 :!:

...vyzkoušeno - stabilní...

NETGEAR is pleased to announce the release of RAIDiator 4.2.15 (x86), the latest firmware for the ReadyNAS Pro Business Edition, Pro Pioneer, NVX, NVX Pioneer, 2100, 3100, 3200, 4200, Ultra 4, and Ultra 6 network attached storage product lines.

The simplest way to update is to use the System/Update/Remote tab in Frontview. If you prefer, you can choose to do a local update by first downloading the new image here: RAIDiator-x86-4.2.15. We recommend that you update your ReadyNAS to this latest RAIDiator release to ensure your ReadyNAS is running with all the latest bug fixes and enhancements.

This release addresses a problem that can cause a drive on the ReadyNAS 3200 and 4200 platforms to hang, causing a failure condition; we urge you to apply this update to avoid encountering this condition. It also addresses some ReadyTiVO functionality fixes.

Změny:
Citace:
Updated ReadyNAS Remote to v1.0.9.30.
Enhanced TiVo support with the following:
Download from each TiVo box concurrently.
Don’t use the date/time in the absense of an episode title if the show is not part of a series.
Handle TiVos with a large number of recordings (>128).
In a case with multiple TiVos with some done and some still archiving, make sure the idle TiVos don’t miss the next archive interval.
If you have two different shows with exactly the same show name, episode number, and episode title, use a different filename for archival instead of overwriting the existing one.
Localize timestamps, so you see the local time of a recording, instead of GMT.
Skip non-TiVos (TiVo Desktop) during the discovery process.
Request at most 50 items at a time like TiVo Desktop, to prevent certain TiVos from freaking out and rebooting.
Strip out all invalid Windows characters from file paths.
Add flag file support for basic database dump/prune. This will allow people to tell ReadyDLNA to re-archive specified shows in the rare cases where this is needed.

Bug fixes
Fixed network dropout issues reported on the Pro, NVX, and Ultra series.
Updated iSCSI service to prevent MPIO crashes.
Support numeric hostnames for SMTP fields.
Fixed fan/temperature control.
Fixed issue where some users did not see HTTPS Shares listing.
Fixed SMART error count reports.
Fixed Pro CPU fan stops spinning on some systems.
Disable default guest access to USB share over AFP. User login required for USB share access unless guest access is explicitly allowed via FrontView by admin. This change takes affect only for factory defaulted systems. Update systems will require admin to manually disable guest access for AFP.
Various patches to ReadyTiVO functionality:
With some DNS servers, MDNS queries can take 15 seconds to return with a name resolution failure status. Our TiVo connection timeout is currently 5 seconds, so ReadyTiVo can never authenticate in these environments.
If a user has an episodic show with no episode title marked for archival, the archival process for that TiVo will stop there.
In environments with multiple TiVos, there is a race condition which causes the database to appear corrupt, and no recordings will be archived until ReadyTiVo is restarted.
Fixed issue where disks on 3200/4200 may be subjected to hang in some race conditions.

Stahujte (cca 62 MB):

...zbytek na tomto linku.


Nahoru
 Profil  
 

Re: RAIDiator - softwarové srdce NASek
PříspěvekNapsal: 21:08, 06 dub 2011 
Offline
admin
admin
Uživatelský avatar

Registrován: 13:40, 11 led 2006
Příspěvky: 1306
Po delší době netgear vydal novou verzi RAIDiatoru - 4.2.16 :!:

Hlavní vlastností je podpora 3TB (a vyšších) disků.

Obrázek
Prozatím Netgear uvádí kompatibilitu těchto disků (např u "ReadyNAS Pro 6"):
:arrow1: Hitachi Deskstar 7K3000 HDS723030ALA640 (Must be used with 4.2.16 or newer firmware)
:arrow1: Hitachi Deskstar 5K3000 HDS5C3030ALA630 (Must be used with 4.2.16 or newer firmware)
:arrow1: Seagate Barracuda XT ST33000651AS (Must be used with 4.2.16 or newer firmware)

NETGEAR is pleased to announce the release of RAIDiator 4.2.16 (x86), the latest firmware for the following ReadyNAS network attached storage products:
ReadyNAS 1500
ReadyNAS 2100
ReadyNAS 3100
ReadyNAS 3200
ReadyNAS 4200
ReadyNAS Ultra 2/Plus
ReadyNAS Ultra 4/Plus
ReadyNAS Ultra 6/Plus
ReadyNAS Pro 2
ReadyNAS Pro 4
ReadyNAS Pro 6
ReadyNAS Pro Business Edition
ReadyNAS Pro Pioneer Edition
ReadyNAS NVX
ReadyNAS NVX Pioneer Edition

The simplest way to update is to use the System/Update/Remote tab in Frontview. If you prefer, you can choose to do a local update by first downloading the new image here: RAIDiator-x86-4.2.16. We recommend that you update your ReadyNAS to this latest RAIDiator release to ensure your ReadyNAS is running with all the latest bug fixes and enhancements.

Upozornění: If you update to 4.2.16, you will NOT be able to go back to 4.2.15 or earlier due to the automatic change in the partition format to support 3TB+ hard disks.

Změny:
1. 3TB+ hard drives are now supported.
2. Volume expansion is now supported in Flex-RAID mode.
3. X-RAID2 can now migrate from a single to dual redundancy on 6-bay ReadyNAS and above. To do this, you will need to go to the Volume tab in Frontview and select the option to use the next added drive for dual redundancy, versus expansion (default).
4. RAID 10 is now supported in Flex-RAID mode. To use RAID 10, you must have free space in 4 drives or more.
5. iSCSI restore option now available in FrontView Backup.
6. IPv6 support added (limited to CIFS and FTP for the time-being. Keep in mind CIFS support requires DNS).
7. Teaming selection and support enhanced with switch level settings in 802.3 mode.
8. Add-on menu added, along with new pages for add-ons. You can now directly install add-ons and add-on updates from these pages.
9. Performance of large file writes over CIFS improved.
10. Added support for 4TB+ Time Machine backups.
11. Allow Windows workgroup names to contain spaces.
12. Added fan speed control for the ReadyNAS 2100.
13. Added monitoring and shutdown of APC UPS over SNMP.

Oprava chyb:
1. Added support for NETGEAR XSM7224S 10G switch.
2. Fixed USB 3.0 device not showing up in Backup tab on Ultra 2.
3. Fixed potential for infrequent iSCSI disconnections and potential hang with Windows MPIO.
4. Fixed scheduled wakeup from power timer.
5. Fixed file transfer problem using CIFS from OS X.
6. Fixed file size display issue on OS X using CIFS.
7. Fixed domain authentication issues with multiple NICs.
8. Fixed TiVo archival issues with Australian TiVos.
9. Fixed stability issue with RALUS.

Limitations:
Once you upgrade to this release, you cannot downgrade back to 4.2.15 or prior releases.
IE 6 no longer supported. Please update to IE 7 or 8.
Volume expansion will not work beyond 16 TB. To support 16 TB or greater, you’ll have to factory default with that capacity in place.
Snapshot resizing is disabled in the release. We will re-enable this feature in a future update.
If you have previously configured an SNMP monitored UPS and attach a local USB UPS, the USB UPS will be monitored by the ReadyNAS. To switch back to SNMP monitoring, disconnect the USB UPS and then re-enter the IP address of the SNMP monitored UPS device.

Stahujte

_________________
CPU: Intel i7 2600K @4,5GHz & Noctua NH-D14 RAM: 16GB ADATA DDR3 1600MHz MB: ASUS Maximus IV Extreme-Z VGA: Gigabyte GTX580 HDD: SSD OCZ 120GB Vertex 2 + WD VelociRaptor WD1500HLFS + NAS Zvuk: X-Fi Titanium Fatal1ty Champion Series Zdroj: Fortron Everest 700W Case: Cooler master HAF 932 Enh. Monitor: 24" LCD HP LP2465.
Photo: Nikon D90 se seťákem 18-105mm VR, telátko Nikkor 70-300 VR.


Nahoru
 Profil  
 

Re: RAIDiator - softwarové srdce NASek
PříspěvekNapsal: 08:40, 06 kvě 2011 
Offline
admin
admin
Uživatelský avatar

Registrován: 13:40, 11 led 2006
Příspěvky: 1306
A máme tady opět novou verzi RAIDiatoru - 4.2.17 :!:

* otestoval jsem a funguje vše bezproblémů

NETGEAR is pleased to announce the release of RAIDiator 4.2.17 (x86), the latest firmware for the following ReadyNAS network attached storage products:
ReadyNAS 2100
ReadyNAS 3100
ReadyNAS 3200
ReadyNAS 4200
ReadyNAS Ultra 2/Plus
ReadyNAS Ultra 4/Plus
ReadyNAS Ultra 6/Plus
ReadyNAS Pro 2
ReadyNAS Pro 4
ReadyNAS Pro 6
ReadyNAS Pro Business Edition
ReadyNAS Pro Pioneer Edition
ReadyNAS NVX
ReadyNAS NVX Pioneer Edition

Změny:
1. Provide download links for exported user and group lists instead of asking for an email address.
2. Raised iSCSI intiator limit to 256.
3. Updated ReadyNAS Remote to the latest version.


Oprava chyb:
1. Add monitoring support for the Ultra 2, Ultra 2 Plus, and Pro 2 CPU temperature. Speed up the fan quickly if the CPU temp rises out of conservative safe zone. This fixes a problem with the specified systems potentially freezing in higher temperature environments.
2. Fixed bug in log truncation that caused AFP service to quit.

Stahujte odtud.

Další info zde.

_________________
CPU: Intel i7 2600K @4,5GHz & Noctua NH-D14 RAM: 16GB ADATA DDR3 1600MHz MB: ASUS Maximus IV Extreme-Z VGA: Gigabyte GTX580 HDD: SSD OCZ 120GB Vertex 2 + WD VelociRaptor WD1500HLFS + NAS Zvuk: X-Fi Titanium Fatal1ty Champion Series Zdroj: Fortron Everest 700W Case: Cooler master HAF 932 Enh. Monitor: 24" LCD HP LP2465.
Photo: Nikon D90 se seťákem 18-105mm VR, telátko Nikkor 70-300 VR.


Nahoru
 Profil  
 

Re: RAIDiator - softwarové srdce NASek
PříspěvekNapsal: 13:00, 21 črc 2011 
Offline
admin
admin
Uživatelský avatar

Registrován: 13:40, 11 led 2006
Příspěvky: 1306
S vydáním nového operačního systému Mac OSX Lion vydal také Netgear nový firmware 4.2.18 pro své NASky, aby se zajistila plná podpora protokolu AFP a hlavně bezproblémovou funkčnost Time Machine.

* otestoval jsem a funguje vše bezproblémů

NETGEAR is pleased to announce the release of RAIDiator 4.2.18 (x86), the latest firmware for the following ReadyNAS network attached storage products:
ReadyNAS 2100
ReadyNAS 3100
ReadyNAS 3200
ReadyNAS 4200
ReadyNAS Ultra 2/Plus
ReadyNAS Ultra 4/Plus
ReadyNAS Ultra 6/Plus
ReadyNAS Pro 2
ReadyNAS Pro 4
ReadyNAS Pro 6
ReadyNAS Pro Business Edition
ReadyNAS Pro Pioneer Edition
ReadyNAS NVX
ReadyNAS NVX Pioneer Edition

Změny:
1. Enhanced AFP and Time Machine support to work with Mac OS X Lion.
2. Added RAID 10 support for ReadyNAS 1500, 2100 v1, NVX, and NVX Pioneer.

Oprava chyb:
1. Reduced background volume task priority to avoid starving iSCSI.
2. Fixed ReadyNAS Pro 6 inadvertently powering up when WOL is disabled.
3. Fixed ReadyNAS Remote not working from factory default.
4. Updated ReadyDLNA with various bug fixes.

Nový FW stahujte odtud.

Další info zde + speciální příspěvek "ReadyNAS and Apple OS X Lion".


Nahoru
 Profil  
 

Re: RAIDiator - softwarové srdce NASek
PříspěvekNapsal: 20:39, 07 zář 2011 
Offline
admin
admin
Uživatelský avatar

Registrován: 13:40, 11 led 2006
Příspěvky: 1306
Netgear vydal nový firmware 4.2.19.

NETGEAR is pleased to announce the release of RAIDiator 4.2.19 (x86), the latest firmware for the following ReadyNAS network attached storage products:
ReadyNAS 1500
ReadyNAS 2100
ReadyNAS 3100
ReadyNAS 3200
ReadyNAS 4200
ReadyNAS Ultra 2/Plus
ReadyNAS Ultra 4/Plus
ReadyNAS Ultra 6/Plus
ReadyNAS Pro 2
ReadyNAS Pro 4
ReadyNAS Pro 6
ReadyNAS Pro Business Edition
ReadyNAS Pro Pioneer Edition
ReadyNAS NVX
ReadyNAS NVX Pioneer Edition

Změny:
1. Enhanced AFP support to work with the latest Mac OS X.
2. Added RAID 10 support for ReadyNAS 1500, 2100 v1, NVX, and NVX Pioneer.

Oprava chyb:
1. Reduced background volume task priority to avoid starving iSCSI.
2. Fixed ReadyNAS Pro 6 inadvertently powering up when WOL is disabled.
3. Fixed ReadyNAS Remote not working from factory default.
4. Updated ReadyDLNA to 1.0.22.
5. Fixed updates where previously enabled Advanced AFP Permission got disabled. After update, please check your AFP share settings and re-enable Advanced AFP Permission if it got disabled with the 4.2.18 update.
6. CNID database for all AFP shares will be updated during the firmware update process. If you have large shares, it may take longer during the firmware update. This is to be expected.
7. Fixed an AFP crash when doing permission checking.
8. Fixed log rotation where some services were being terminated at 6:25 AM.
9. Applied security patch to the web service.
10. Fixed compatibility with certain USB 3 devices on ReadyNAS Ultra 2 and Pro 2.

Nový FW stahujte odtud.

Další info zde.


Nahoru
 Profil  
 

Re: RAIDiator - softwarové srdce NASek
PříspěvekNapsal: 09:18, 26 dub 2012 
Offline
admin
admin
Uživatelský avatar

Registrován: 13:40, 11 led 2006
Příspěvky: 1306
Po nezvykle dlouhé době Netgear vydal nový firmware ve verzi 4.2.20.

NETGEAR is pleased to announce the release of RAIDiator 4.2.20 (x86), the latest firmware for the following ReadyNAS network attached storage products:
ReadyNAS 1500
ReadyNAS 2100
ReadyNAS 3100
ReadyNAS 3200
ReadyNAS 4200
ReadyNAS Ultra 2/Plus
ReadyNAS Ultra 4/Plus
ReadyNAS Ultra 6/Plus
ReadyNAS Pro 2
ReadyNAS Pro 4
ReadyNAS Pro 6
ReadyNAS Pro Business Edition
ReadyNAS Pro Pioneer Edition
ReadyNAS NVX
ReadyNAS NVX Pioneer Edition

The simplest way to update is to use the System/Update/Remote tab in Frontview. If you prefer, you can choose to do a local update by first downloading the new image here: RAIDiator-x86-4.2.20. We recommend that you update your ReadyNAS to this latest RAIDiator release to ensure your ReadyNAS is running with all the latest bug fixes and enhancements.

WARNING: If you update to 4.2.20, you will NOT be able to go back to 4.2.15 or earlier due to the automatic change in the partition format to support 3TB+ hard disks.

The following are changes since RAIDiator 4.2.19.

Změny:
1. Updated iSCSI service to work with VMware ESXi 5.
2. HTTP service configuration changes to be NESSUS scanner compliant.
3. Added alert subject to SNMP trap messages to help identify disk#.
4. Updated NTP service for more accurate clock syncs.
5. Allow passwords with ‘$$’ in them.
6. Enhanced CIFS service to provide better performance to some devices.
7. Updated ReadyDLNA to latest version (1.0.24).

Oprava chyb:
1. Fixed issue where volume maintenance was performed weekly regardless of interval setting.
2. Updated AFP service to resolve misc bugs.
3. iSCSI work-around for Novell NetWare 6.5 clients that don’t follow spec.
4. Fix Route tab on Ultra systems not functioning.
5. Fix iSCSI UI issue on non-English clients.
6. Fix issue where layer2+3 teaming settings could be lost.
7. Fix possible system hang during upgrade from pre-4.2.16 releases to latest.

Nový FW stahujte odtud.


Nahoru
 Profil  
 

Zobrazit příspěvky za předchozí:  Seřadit podle  
Odeslat nové téma Odpovědět na téma  [ Příspěvků: 13 ] 

Všechny časy jsou v UTC + 1 hodina [ Letní čas ]


Nemůžete zakládat nová témata v tomto fóru
Nemůžete odpovídat v tomto fóru
Nemůžete upravovat své příspěvky v tomto fóru
Nemůžete mazat své příspěvky v tomto fóru
Nemůžete přikládat soubory v tomto fóru

Přejít na:  
cron

Domovská stránka webu - Weblog na kukni.cz

XHTML validní fórum    CSS validní fórum

TOPlist